|
Window Felt Installation Tools Needed: Screwdriver, 3M Adhesive, Sissors 1. Check the replacement channel for fit and length before removing the old channel 2. We supply enough window channel so that need be you can run it inside the door to the bottom of the glass channel. If you are doing this you will need to remove your door panels, inside door handles etc. 3. Remove old window channel. 4. Your new channel contains a lip that will hook to the channel opening in the door. You can use some 3M Adhesive to help hold the channel in place, but this is not required. 5. Carefully install the channel around the entire section of the door making sure it fits properly before using any adhesive. 6. Trim to the correct length if necessary. |